Milestone! The emerging company successfully developed potassium - cesium brazing flux paste for aluIssuing time:2023-11-20 10:51
Successfully developed potassium cesium brazing flux paste in response to customer needs In April this year, we learned that a customer in Guangdong had a demand for potassium cesium brazing flux paste. We immediately communicated with the customer. After determining the customer's requirements, applications, and specifications, we carried out the R & D work. Adhere to the company's concept of "Driven by design innovation to meet customer needs"! In order to develop products that can meet the customer's usage purposes, we continuously developed samples in the laboratory and analyzed, tested, and trial - welded them. After three months of experimental research, we finally sent two samples to the customer in July. After using the samples, the customer feedback that the effect of one of them met their requirements and expressed satisfaction with the usage effect. In mid - August, the customer conducted a 500 - hour salt spray test on the workpieces brazed with the samples developed by our company. In September, they obtained the test result report and shared this joy with us: the test result was "No penetration, corrosion into the aluminum tube substrate, and no cracks". This also means that we passed the test and successfully developed a product that meets the customer's needs and satisfies the customer.  Picture Product introduction This product is an odorless solder paste containing an organic carrier and a non - corrosive flux. The melting temperature varies according to the cesium content. It can be used directly after stirring, and the flux residue after soldering does not need to be cleaned. The cesium in this potassium cesium brazing flux paste is very effective in dealing with the high magnesium and high copper content in aluminum alloys. The flux content, cesium content, viscosity, and brazing temperature of the solder paste can be adjusted according to the application requirements of each customer to enhance the product. This product is used together with aluminum - silicon solder for flame brazing, gas - shielded brazing, and induction brazing of aluminum alloys. It is suitable for pipeline parts in systems such as refrigeration air conditioners and automobile air conditioners, such as aluminum tubes and aluminum tube joints.  Picture 
|
